Paint FAQs

What should I use to paint kitchen cupboards?
Our Eggshell paint is the perfect choice for instantly updating kitchen cupboards, as it is hard-wearing and washable; ensure surfaces are treated and prepp...
Tue, 6 Oct, 2020 at 4:44 PM
Is your paint suitable for radiators?
For painting metal, such as radiators you can use our Eggshell paint with the correct primer for radiators, available from all good DIY stores.  If you ar...
Tue, 6 Oct, 2020 at 4:45 PM
Can you use your paint outside?
Please refer to our Paint Buying Guide; our Eggshell paint is suitable for use on interior and exterior wood and metal with the correct primed surface.
Mon, 26 Oct, 2020 at 3:04 PM
Can I use Cox & Cox paint on floors?
No.
Tue, 6 Oct, 2020 at 4:49 PM
What is the average coverage of a 2.5l pail?
Paint coverage varies according to the chosen finish and the texture and porosity of the surface being painted. Please refer to our Paint Buying Guide for...
Tue, 6 Oct, 2020 at 4:49 PM
What paint brushes should I use on water-based paints?
Easy to apply, use synthetic bristle brushes or rollers for the best result since traditional bristle brushes can leave deeper brush marks due to their stif...
Tue, 6 Oct, 2020 at 4:50 PM
Is your paint suitable to apply by roller?
Our paint can be applied using both brushes or rollers, depending on the desired final appearance. Rollers provide a smooth uniform finish on well-prepare...
Tue, 6 Oct, 2020 at 4:51 PM
How many coats of paint should I use?
There are conditions specific to your project that can affect this, but we would always recommend a minimum of two coats, and the top coat can be thinned wi...
Tue, 6 Oct, 2020 at 4:51 PM
How long should I leave paint to dry between coats?
Please see our Paint Buying Guide for your chosen paint finish for drying time.
Mon, 26 Oct, 2020 at 2:59 PM
How long must I wait before painting over new plaster?
We recommend leaving a fresh plaster skim for at least four weeks, as the plaster needs to be completely dry before applying paint. For new, fully plastere...
Mon, 26 Oct, 2020 at 3:00 PM